Home arrow Products arrow Filter Systems
 
Filter Systems

 


Jet-Filters

 

The Jet filter is used as intermediate filter for depositing dust. It is applied for clean gas or raw gas. The plant is free configurable since it is modularly constructed.

The interval-dedusting of the filter elements is done fully-automatic. Thus a NESTRO-Jet-Filter Plant may be used 24h a day.

The filter unit consists of filter plate, filter hoses an pre-depositing chamber. The choice of the filter material depends on the material to be conveyed as well as from the guiding of extracted and exhausted air.

The coverage protecting against weather also serves as supporting element of the hose suspension. It enables the directed guidance of extracted or exhausted air and the negative pressure operation of the plant. All needed openings like revision doors, negative pressure shutters and air vents are integrated.

<top>


Bagging Filters

absackfilter_g.jpg

 

Bagging filters are produced for operation under negative and excessive pressure.

Bagging filters are applicable for wood dusts, wood shavings and similar material. They are produced as expandable modular systems and may also be equipped with an automatically charged NESTRO briquetting system.

All safety devices, like dry erase pipe, ex areas in the field of raw gas, backlog vane and current volume supervision art part of this plant. The quadratic chipping barrels enable the most easy and user friendly as well as dust free disposal of chippings.

 

<top>


Negative Pressure Filter House

unterdruckfilterhaus_g.jpg

 

 

 

With the NESTRO filter house big filter areas may be placed on the narrowest room. The filer houses are equipped with a silo discharge and large temporary storage capacities.

NESTRO-filter houses are delivered with up to 900 m² filter area.

The filter houses may be assembled with integrated ventilators above the filter plant or with separately deployed ventilator.

 

 

 

 

 

 

 

 

<top>


Counter Pressure Filters

 

gegendruckfilter_g.jpg

 

<top>


Intermediate Filters

zwischenfilter_g.jpg

 

The NESTRO intermediate filter deposits raw gas in the supply air box, the thus cleaned air may be transferred back into the room.

The NESTRO intermediate filter has the advantage that it may be retrofitted with a chain conveyor at any time and thus may be extended to an air volume of over 200.000 m³/h.

The filter consists of separate sections (chambers), which may be extended any time. If the intermediate filter is equipped with the NESTRO-counter pressure filter (vibration plus scavenging air) a continuous operation is warranted.

 

<top>


Chain Filters

kettenfilter_g.jpg

<top>


Bunker Filters

 

<top>

 
Energie-Optimierung mit neuem Entstauber NE300
There are no translations available

Schon im Vorfeld der LIGNA 2009 hatten NESTRO und HOMAG in Zusammenarbeit mit der FH Rosenheim Luftmengenbedarf und Widerstand von HOMAG-Kantenanleim-Anlagen durch Messreihen ermittelt und dokumentiert.
NESTRO hatte auf Grundlage dieser Messdaten und Betriebsanforderungen eine energieoptimierte Absauglösung für die Kantenbearbeitung entwickelt, die während der LIGNA im Vergleich zu herkömmlichen Lösungen präsentiert wurde.
Read more...
 


© 2010 NESTRO Lufttechnik GmbH